• Simple and economical to use.
• Reduces testing time.
• No special calibration required.
• Plated for rust resistance and long life..
The K-Slump Tester was developed to determine the slump and workability of fresh concrete. The device can be used for in-place measurements and for measurements inside of test molds and forms. The device is used as an indicator to correlate to the standard slump test.
In operation, the K-Slump Tester is wetted and inserted into the concrete for 40 seconds. The K-Slump reading is then taken on the scale to the height that the concrete has penetrated the tester. The tester is then removed from the concrete vertically and the workability reading is taken on the scale as the height of concrete retained in the tester. After the readings, the unit is easily cleaned with water.
