Two methods of moulding and compaction are used in the various testing standards. The jolting table method is usually described as the reference method and a vibratory method is permitted as an alternative.
Graded pack for 3 prisms. 1350g pack. Complies to EN 196-1, EN 196-9, BS 1881, ASTM C778 & ISO 679 Physical state: solid SiO2: > 95 % Form: crystallized Form of grains: subangular - Color: white - Smell : odourless - pH: # 7 Specific temperature for changes in physical state: Fusion temperature: 1610° C, boiling temperature: 2230°C Decomposition temperature: none Flash Point: not applicable Mass volume: absolute: 2,63 g/m³ - apparent: 1,6 g/cm³ Solubility: insoluble in water, soluble in hydro-fluoric acid ...
For 40.1 x 40 x 160 mm mortar prisms. This mould is manufactured to a very high specification. Supplied with glass plate. Complies to EN 196-1, ISO 679, EN 413-2, EN 459-2, EN 13454-2. ...
For 39-1100 Mould. Complies to EN 196-1, ISO 679, EN 413-2, EN 459-2, EN 13454-2 ...
Double-ended, used for spreading and levelling mortar in mould. ...
